Stainless steel sheets

EN

ASTM

DIN

Description

1 D

N1

c2 (IIa)

Hot rolled, heat treated, annealed, pickled

2B

2B

n (IIIc)

Cold rolled. Heat treated, 

etched, pickled

2R

BA

M (IIId)

Cold rolled, annealed in furnace with hydrogen nitride

2K

N4/N5/SB

P (V)

N8

N8

-

Watery processing with abrasive + polishing (Quality as glass mirror)

Class

Steel Grade

Application

CIS countries  standard

ASTM

EN

Austenite

08Х18Н10Т

AISI-321

1.4541

Weldingequipment operating in highly aggressive environments, heat exchangers, muffles, tubes, parts of furnace fixtures, electrodes incendiary spark plugs. Corrosion-resistant and heat resistant austenitic steel.

12Х18Н10Т

AISI-321

1.4878

Machine partsoperating up to 600° C; welding apparatus and flasks operating in dilute nitric acid, acetic acid, phosphoric acid, alkali liquor and saline solution, and other parts operating under pressure at temperatures from -196 to 600°C, and in  aggressive environments - up to 350°C. Corrosion-resistant austenitic steel.

08Х18Н10

AISI-304

1.4301

Pipes andfurnace parts, muffles, heat exchangers, retorts, elbows, headers exhaust systems, electrodes of ignition spark plugs, welding machines and containers of chemical engineering, operating at t from -196 to 600°C in media active substances.

Corrosion-resistant steel, heat resistant, austenitic steel.

10Х17Н13М2Т

AISI-316Ti

1.4571

Weldments, fasteners operating in media to high aggressive substances, intended for long service at 600°C. Corrosion-resistant austenitic steel.

03Х18Н11

AISI-304L

1.4307

Could be applied for the same purposes as 08X18N10T steel grade, as well as for operating in nitric acid and nitric acid substances at elevated temperatures. Has a higher resistance to intergranular corrosion and high resistance to knife-line corrosion, in comparison to 12X18Н12Бsteel grade.

08Х17Н13М2

AISI-316

1.4401

See 316Ti

03Х17Н13М2

AISI-316L

1.4404

See 316Ti

03X17H14M3

AISI-316L

1.4435

See 316Ti

10Х23Н18

AISI-310S

1.4845

Pipes andinstallation parts for methane conversion, pyrolysis, flat metal parts

20Х23Н18

AISI-310

1.4841

Partsof mounts in chemical and oilindustry, gas pipelines, the combustion chamber (can be used for heating elements of resistance)

12Х15Г9НД

AISI-201

1.4372

Industrialpiping, building constructions, home kitchen design, food industry.

12Х17Г8Н4Д

AISI-202

1.4373

See201

Ferrite

08X13

AISI-410S

1.4000

Partswith high plasticity, undergoing impact loads (valves hydraulic presses, household items), as well as products subject to operationin slightly aggressive environments (precipitation, aqueous solutions of salts of organic acids at room temperature, etc.). Corrosion-resistant and heat resistant ferrite steel.

12X13

AISI-410

1.4006

Partswith high plasticity, undergoing impact loads (valves hydraulic presses, household items), as well as products subject to operation in slightly aggressive media at t = 450-500°C. Corrosion-resistant, heat resistant and heat resistant martensite-ferrite steel

03Х13

AISI-409

1.4512

Partswithhighductility, asa rule, for domesticuse.

See 08Х13

08Х17

AISI-430

1.4016

Fasteners, rollers, bushings and other parts of machines and flasks operating in dilute nitric acid, acetic acid, citric acid, salt solutions, possessing oxidizing properties. Corrosion-resistant and heat resistant upto 850° C, ferrite steel

08Х17Т

AISI-430Ti   AISI-439

1.4510 1.4520

Itemsoperating in oxidizing environments, atmospheric conditions, except marine, where pitting is possible. Heat exchangers and pipes. Welded constructions, not affected by shock loads and operating at a temperature no lower than - 20°C. Corrosion-resistant, heat-resistant ferrite steel

Martensite

15X11МФ

-

Turbineblades, forges, tires and other parts intended for continuous operation at a t upto 560°C.

13Х11Н2В2МФ

-

Responsiblecrucial pressure bearing parts operating at 600°C. Heat-resistant martensite steel

20Х13

AISI-420L

1.4021

Steamturbine blades, valves, bolts and pipes. Parts with high plasticity, undergoing impact loads, as well as items subject to operation in slightly aggressive substances at t = 450-500°C. Corrosion-resistant, heat-resistant martensite steel

30Х13

AISI-420F

1.4028

Cutting, measuring and surgical instruments, springs, carburetor needles, household items, valve plate compressors.

40Х13

AISI-420

1.4034 1.4031

Cutting, measuring and surgical instruments, springs, carburetor needles, household items, valve plate compressors, etc., operating at temperature upto 450-500°C and in corrosive environments. Corrosion-resistant steel of martensite class.

Martensite-Ferrite

14Х17Н2

-

Fordifferent parts inchemical and aviation industries (blades, discs, shafts, bushings, flanges, fasteners and other parts). Details of compressor machines that run on nitrous gas, or in hostile environments at low temperature. Corrosion-resistant, heat-resistant martensite-ferriteclass